| S.No. | Title of paper | Name of the author/s | Department of the teacher | Name of journal | Year of publication | Indexing | |||||||||||||||||
| 1 | A review of Modern Technologies for reduction of dioxins and furans from flue gas emissions of biomedical waste incinerators in Indian Perspective | Dr. Sandeep Verma | Chemical Engineering | Pollution Research | 2022 | Scopus | |||||||||||||||||
| 2 | Biochemical Treatment of Textile Wastewater | Shashi Kant Dubey, Rohit Maurya | Civil Engineering | International Journal for Research in Applied Science and Engineering Technology | 2022 | UGC | |||||||||||||||||
| 3 | A novel multimodality based dual fusion integrated approach for efficient and early prediction of glaucoma | Law Kumar Singh, Khanna, M. & Pooja | Computer Science & Engg. | Biomedical Signal Processing and Control | 2022 | SCI | |||||||||||||||||
| 4 | Performance evaluation of various deep learning based models for effective glaucoma evaluation using optical coherence tomography images | Law Kumar Singh, Pooja, Garg, H | Computer Science & Engg. | Multimedia Tools Application | 2022 | SCI | |||||||||||||||||
| 5 | An improved Supervised Classification algorithm in | Khushboo Jain. Poonam Singh, Sanjana Yadav | Computer Science & Engg. | International Journal of Reliable and Quality E-Healthcare (IJRQEH) | 2022 | SCOPUS, ESCI | |||||||||||||||||
| 6 | Histogram of Oriented Gradients (HOG) Based Artificial Neural Network (ANN) Classifier for Glaucoma Detection | LAW KUMAR SINGH, Pooja and Garg Hitendra and Khanna Munish | Computer Science & Engg. | International Journal of Swarm Intelligence Research(IJSIR) | 2022 | ESCI,SCOPUS | |||||||||||||||||
| 7 | A novel hybrid robust architecture for automatic screening of glaucoma using fundus photos, built on feature selection and machine learning-nature driven computing | Law Kumar Singh, Munish Khanna, Shankar Thawkar | Computer Science & Engg. | Expert Systems | 2022 | SCI | |||||||||||||||||
| 8 | Deep Learning System Applicability for Rapid Glaucoma Prediction from fundus images across various data sets | Law Kumar Singh, Pooja, Hitendra Garg and Munish Khanna | Computer Science & Engg. | Evolving Systems , springer | 2022 | SCI | |||||||||||||||||
| 9 | PERFORMANCE ANALYSIS OF 5 MWp GRID-CONNECTED SOLAR PV POWER PLANT USING IEC 61724 | Ajeet Singh | Electrical & Communcation Engg. | International Research Journal of Engineering and Technology (IRJET) | 2022 | UGC approved journal | |||||||||||||||||
| 10 | DETECTION OF DEFECTS IN SOLAR PANELS USING THERMAL IMAGING BY PCA AND ICA METHOD | Sanjay Singh | Electrical & Communcation Engg. | International Research Journal of Engineering and Technology (IRJET) | 2022 | UGC approved journal | |||||||||||||||||
| 11 | Design and Analysis of CMOS based Low Power carry Select Full Adder | Himanshu Prakash Rajput | Electrical & Communcation Engg. | International Journal of Engineering, Technology , Science and Research, 2016 | 2022 | UGC approved journal | |||||||||||||||||
| 12 | Comparison of conventional SFRA with intelligent SFRA | Richa Kapoor and Himanshu Vijay | Electrical & Electronics | International Journal of Advanced Technology and Engineering Exploration | 2022 | Google Scholar | |||||||||||||||||
| 13 | Classification of masses in digital Mammograms using Biogeography-based optimization | Thawkar S | Information Technology | Journal of King Saud university- Computer and Information Sciences | 2022 | Scopus/Web of Science | |||||||||||||||||
| 14 | Image Encryption and Authentication using Repetitive Application of Linear Transformations & MD5 | Ajay Raj Parashar Mansi Sharma Surbhi Lakhani | Information Technology | International Journal of Advance Research in Science and Engineering | 2022 | Google Scholar | |||||||||||||||||
| 15 | Efficient message recovery proxy blindsignature scheme from pairing, | Girraj Kumar Verma and B. B. Singh, | Mathematics | Transaction on Emerging Telecommunication Technologies | 2022 | Inspec (Institution of Engineering and Technology) | |||||||||||||||||
| 17 | SCBS: A Short Certificate-Based Signature Scheme With Efficient Aggregation for Industrial-Internet-of-Things Environment | Harendra Singh | Mathematics | IEEE: Internet of Things Journal | 2022 | SCI | |||||||||||||||||
| 18 | Provably secure message recovery proxy signature scheme for wireless sensor networks in e-healthcare | Harendra Singh, Girraj Kumar Verma, B. B. Singh | Mathematics | Wireless Personal Communication, Vol 99(1), pp. 539-554, 2018 | 2022 | SCI | |||||||||||||||||
| 19 | Simultaneous dual series equations involving Laguerre polynomial with Matrix arguments, | Mukti Richhariya | Mathematics | International Journal of Pure and Applied Mathematical sciences, Vol-10, number-2 (2017), pp. 135-139 | 2022 | Mathematical Reviews, MathSciNet, Zentralblatt Math | |||||||||||||||||
| 20 | Short certificate-based proxy signature scheme from pairing | Girraj Kumar Verma and B. B. Singh | Mathematics | Transaction on Emerging Telecommunication Technologies,2017 | 2022 | Inspec (Institution of Engineering and Technology) | |||||||||||||||||
| 21 | Deterministic Inventory Model for Item with Linear Demand, Variable Deterioration, and Partial Backlogging, | Harendra Singh, Saurabh Srivastava | Mathematics | Int. J. Inventory Research, Volume 4, Issue 4, 2017. | 2022 | cnpLINKer (CNPIEC), Google Scholar | |||||||||||||||||
| 22 | Efficient message recovery proxy blindsignature scheme from pairing, | Girraj Kumar Verma and B. B. Singh, | Mathematics | Transaction on Emerging Telecommunication Technologies | 2022 | Inspec (Institution of Engineering and Technology) | |||||||||||||||||
| 23 | SCBS: A Short Certificate-Based Signature Scheme With Efficient Aggregation for Industrial-Internet-of-Things Environment | Harendra Singh | Mathematics | IEEE: Internet of Things Journal | 2022 | SCI | |||||||||||||||||
| 24 | Provably secure message recovery proxy signature scheme for wireless sensor networks in e-healthcare | Harendra Singh, Girraj Kumar Verma, B. B. Singh | Mathematics | Wireless Personal Communication, Vol 99(1), pp. 539-554, 2018 | 2022 | SCI | |||||||||||||||||
| 25 | Simultaneous dual series equations involving Laguerre polynomial with Matrix arguments, | Mukti Richhariya | Mathematics | International Journal of Pure and Applied Mathematical sciences, Vol-10, number-2 (2017), pp. 135-139 | 2022 | Mathematical Reviews, MathSciNet, Zentralblatt Math | |||||||||||||||||
| 26 | Short certificate-based proxy signature scheme from pairing | Girraj Kumar Verma and B. B. Singh | Mathematics | Transaction on Emerging Telecommunication Technologies,2017 | 2022 | Inspec (Institution of Engineering and Technology) | |||||||||||||||||
| 27 | Deterministic Inventory Model for Item with Linear Demand, Variable Deterioration, and Partial Backlogging, | Harendra Singh, Saurabh Srivastava | Mathematics | Int. J. Inventory Research, Volume 4, Issue 4, 2017. | 2022 | cnpLINKer (CNPIEC), Google Scholar | |||||||||||||||||
| 28 | Experimental Investigation of Different Fineness and Firing Temperatures on Pellets Properties of Different Iron Ore fines from Indian Mines | Rakesh Prasad |
| Materials | 2022 | SCI | |||||||||||||||||
| 29 | Effect of process parameters on the diesel engine performance fuelled with Prosopis juliflora biodiesel response surface methodology approach | A Sharma, A Tyagi, Y Singh… | Mechanical Engineering | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering | 2022 | SCI | |||||||||||||||||
| 30 | Tribo-mechanism analysis of epoxidized Putranjiva oil (Putranjiva roxburghii) and understanding lubricity with silicon oxide nanoparticle addition | Yashvir Singh https, Nishant K Singh https, Gaurav K Badhotiya | Mechanical Engineering | SAGE | 2022 | SCOPUS | |||||||||||||||||
| 31 | Performance of Single Slope Solar Still with Various Operation Parameters –An Experimental, Statistical, and CFD simulation approach toward optimality | Rakesh Prasad | Mechanical Engineering | Journal of Process Mechanical Engineering | 2022 | SCI | |||||||||||||||||
| 32 | Tribological study and parameters optimisation of CNT added glass fibre reinforced polymer composite sliding under inert environment | Yashvir Singh &Rajeev Upadhyay Sandeep Agrawal,Nishant Singh | Mechanical Engineering | Advances in materials and manufacturing technologies | 2022 | Scopus | |||||||||||||||||
| 33 | Effect of BaZrO3 nanoparticles on pyroelectric properties of polyvinylidene fluoride (PVDF) | Rohan Sagar, Samanvaya Singh Gaur, MS Gaur | Physics | Journal of Thermal Analysis and Calorimetry | 2022 | SCI | |||||||||||||||||
| 34 | Improvement of dielectric properties of spin coated PMMA-ZnO nano hybrid thin film | MS Gaur, Pramod Kumar Singh, Ajay Pal Indolia, Pankaj Kumar Yadav, AA Rogachev, AV Rogachev | Physics | Ferroelectrics | 2022 | SCI | |||||||||||||||||
| 35 | Investigation of structural properties of electron-beam deposition of zinc oxide coatings doped with copper | Jinguo Sun, MA Yarmolenko, AA Rogachev, AV Rogachev, Xiaohong Jiang, DL Gorbachev, MS Gaur | Physics | Surfaces and Interfaces | 2022 | SCI | |||||||||||||||||
| 36 | Chemiluminescence catalysed by gold nanoparticles for the analysis of arsenic (III) in real water | Mulayam Singh Gaur, Reetu Yadav, Anna N Berlina, Anatoly V Zherdev, Boris B Dzantiev | Physics | Journal of Experimental Nanoscience | 2022 | SCI | |||||||||||||||||
| 37 | Enhancement of β-phase of P(VDF-TrFE)60/40 by BaTiO3 nanofiller | Pramod Kumar Singh, M. S. Gaur, | Physics | Ferroelectrics | 2022 | SCI | |||||||||||||||||
| 38 | Study The Biopotential Parameter For Detection Of Seismic And Enviornmental Changes In Indian Region | Rudraksh Tiwari, Vijay S Katta,Vinod Kumar Kushwah, Mulayam Singh Gaur, Priti Dimri | Physics | Journal of Geography and Cartography, USA | 2022 | OTHERS | |||||||||||||||||
| 39 | Protein Structure and Function Prediction of SARS-CoV 2: Prospective Antivirus Active Drug Binding Sites | Shivi Sharma and Shefali Maheshwari | Biotechnology | IOP Conference Series: Materials Science and Engineering | 2021 | Scopus | |||||||||||||||||
| 40 | Water Quality Status of Yamuna River | Shashi Kant Dubey, Rohit Maurya | Civil Engineering | Journal Of Pure And Applied Research In Engineering And Technology | 2021 | UGC | |||||||||||||||||
| 41 | A Hybrid model using Teaching-learning-based optimization and Salp Swarm Algorithm for Feature Selection and Classification in Digital Mammography | Thawkar S | Information Technology | Journal of Ambient Intelligence and Humanized Computing. | 2021 | Web of Science | |||||||||||||||||
| 42 |
| Yashvir Singh, Nishant K Singh, Abhishek Sharma, Uday Bhan |
| Springer | 2021 | SCOPUS | |||||||||||||||||
| 43 |
| M. Singh R. prasad, Sandeep Agarwal, D. Singh |
| Advances of fluid and thermal engineering | 2021 | SCOPUS | |||||||||||||||||
| 44 | Effect of Different Lubricating Environment on the Tribological Performance of CNT Filled Glass Reinforced Polymer Composite | Sandeep Agrawal, Nishant K. Singh, Rajeev Kumar Upadhyay, Gurminder Singh, Yashvir Singh, Sunpreet Singh, Catalin Pruncu | Mechanical Engineering | materials | 2021 | SCOPUS | |||||||||||||||||
| 45 | Effect of SiO2 Nanoparticles on the Tribological Behavior of Balanites Aegytiaca (Desert date) Oil-Based Biolubricant | Yashvir Singh, Nishant K Singh, Abhishek Sharma. | Mechanical Engineering | Springer | 2021 | SCOPUS | |||||||||||||||||
| 46 | EDD of ceramic composite using modified tool | Nishant K.Singh, Dinesh kumar | Mechanical Engineering | MaterialsToday: Proceedings | 2021 | Scopus | |||||||||||||||||
| 47 | Performance of CuO nanoparticles as an additive to the chemically modified Nicotiana Tabacum as a sustainable coolant-lubricant during turning EN19 steel | Nishant KumarSinghaYashvirSinghbAbhishekSharmacM.K.PaswandVijay K.SingheAvani KumarUpadhyayfVishwa RatnaMishrag |
| Wear | 2021 | SCI | |||||||||||||||||
| 48 | Design and analysis of steering knuckle of hybrid metal matrix composite for the fsae vehicle | Harshit Gupta, Shan Khan, Rajvardhan, Nishant Kumar Singh | Mechanical Engineering | Materials Today: | 2021 | SCOPUS | |||||||||||||||||
| 49 | Design and analysis of steering knuckle of hybrid metal matrix composites for the FSAE vehicle | Nishant kumar singh,rajvardhan |
| Materials Today: Proceedings | 2021 | SCOPUS | |||||||||||||||||
| 50 | Performance improvement of a sugar mill through EXERGY analysis | Mahesh Dhakar, Prity Choudhary, Nishant Kumar Singh | Mechanical Engineering | Materials Today: | 2021 | SCOPUS | |||||||||||||||||
| 51 | Performance of castor based biodiesel during tribological characterization at different load | Yashvir Singh, Prateek Negi, Gaurav Kumar Badhotiya, Nishant K Singh, Abhishek Sharma | Mechanical Engineering | Materials Today: | 2021 | SCOPUS | |||||||||||||||||
| 52 | Improvement of process performance of powder mixed electrical discharge machining by optimisation -A Review | Surendra Singh Thakur, Brijesh Patel, Rajeev Kumar Upadhyay, Nishant K. Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2021 | SCOPUS | |||||||||||||||||
| 53 | Improvement of process performance of powder mixed electrical discharge machining by optimization-A Review. Advances in Materials and Processing Technologies | Surendra Singh Thakur, Brijesh Patel, Rajeev Kumar Upadhyay, Nishant K. Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2021 | SCI | |||||||||||||||||
| 54 | Enhanced energy storage in polyvinylidenefluoride (PVDF)+ BaZrO 3 electroactive nanocomposites | Rohan Sagar, Samanvaya Singh Gaur, Andrews Nirmala Grace, MS Gaur | Physics | IONICS | 2021 | SCI | |||||||||||||||||
| 55 | Efficient chemiluminescence by aptamer–reactant platform combination with activated Ag–Au alloy nanoparticles for cobalt detection | Reetu Yadav, Mulayam Singh Gaur, Seema Bhadauria, Anna N Berlina, Boris B Dzantiev | Physics | International Journal of Environmental Analytical Chemistry | 2021 | SCI | |||||||||||||||||
| 56 | Measurement of thermally stimulated discharge current (TSDC) for detection of thyroid-stimulating hormone (TSH) in human blood | Dayal Saran, Mulayam Singh Gaur | Physics | Journal of Thermal Analysis and Calorimetry | 2021 | SCI | |||||||||||||||||
| 57 | Structure and properties of polyaniline nanocomposite coatings containing gold nanoparticles formed by low-energy electron beam deposition | Surui Wang, АА Rogachev, MА Yarmol enko, АV Rogachev, Jiang Xiaohong, MS Gaur, PA Luchnikov, OV Galtseva, SA Chizhik | Physics | Applied Surface Science | 2021 | SCI | |||||||||||||||||
| 58 | Study of Dielectric Properties of Roots of Banyan Tree at Low Frequencies for the Prediction of Seismic Activities | Rudraksh Tiwari, Vinod Kumar Kushwah, MS Gaur | Physics | International Journal of Engineering, Technology, Science and Research | 2021 | OTHERS | |||||||||||||||||
| 59 | Genome-wide characterization and expression patterns of chitinase genes in the pigeonpea (Cajanus cajan (L.) Millsp.) genome. | Ajay Kumar Mahato, Ajay Kumar Sharma, Nagendra Kumar Singh. | Biotechnology | Plant Omics Journal. 2019, 12(02):109-119. doi: 10.21475/POJ.12.02.19.p1825. | 2020 | Web of Science | |||||||||||||||||
| 60 | Understanding the Role of the WRKY Gene Family under Stress Conditions in Pigeonpea (Cajanus Cajan L.). | Singh, A.; Singh, P.K.; Sharma, A.K.; Singh, N.K.; Sonah, H.; Deshmukh, R.; Sharma, T.R. | Biotechnology | Plants. 2019, 8, 214. | 2020 | Scopus | |||||||||||||||||
| 61 | Understanding the Effect of Structural diversity in WRKY transcription factors on DNA binding efficiency through Molecular Dynamics Simulation. | Akshay Singh, Ajay Kumar Sharma, Nagendra Kumar Singh, Humira Sonah, Rupesh Deshmukh, Tilak Raj Sharma. | Biotechnology | Biology. 2019, 8, 83; doi:10.3390/biology8040083 | 2020 | Scopus | |||||||||||||||||
| 62 | Developing model for prediction the quantity of generation of the infectious medical waste for three hospitals in the city of Agra, U.P. (India) | Dr. Sandeep Verma | Chemical Engineering | Pollution Research | 2020 | Scopus | |||||||||||||||||
| 63 | Performance Evaluation of a Biomedical Waste Incinerator on the basis of Mass and Energy Balance, Fuel Consumption and Cycle Time (A case study of the Biomedical Waste Incinerator Etmadpur, Agra, India) | Dr. Sandeep Verma | Chemical Engineering | Ecology Environment and Conservation | 2020 | Scopus | |||||||||||||||||
| 64 | Developing Model for prediction the quantity of Generation of the Infectious Medical Waste for three hospitals in the City of Agra (India) | Dr. Sandeep Verma | Chemical Engineering | Pollution Research Vol 39, PP (S 45-S53) | 2020 | Scopus | |||||||||||||||||
| 65 | Performance evaluation of a biomedical waste incinerator on the basis of Mass and energy balance, fuel consumption and cycle time (A case study of biomedical waste incinerator Etmadpur Agra, India) | Dr. Sandeep Verma | Chemical Engineering | Ecology, Environment & Conservation Vol 26, PP (S233-S240) | 2020 | Scopus | |||||||||||||||||
| 66 | Experimental study of Biomedical waste incinerator using input-output method | Dr. Sandeep Verma | Chemical Engineering | Ecology, Environment& Conservation Vol 26 , PP (S360-S368) | 2020 | Scopus | |||||||||||||||||
| 67 | Performance Comparison of Multi-objective Algorithms for Test Case Prioritization During Web Application Testing | Munish Khanna | Computer Science & Engg. | AJSE | 2020 | SCI | |||||||||||||||||
| 68 | “Study The Biopotential Parameter For Detection Of Seismic And Enviornmental Changes In Indian Region” | R.Tiwari, Vijay Katta | Computer Science & Engg. | Journal of Geography and Cartography (2018) Volume 1, EnPress Publisher,UK | 2020 | UGC(INDEXING information not available) | |||||||||||||||||
| 69 | Multimodal Biometric Based on Fusion of Ridge Features with Minutiae Features and Face Features | Law Kumar Singh,Munish Khanna | Computer Science & Engg. | IJISMD,IGI Global | 2020 | SCOPUS,ESCI | |||||||||||||||||
| 70 | Detection of Glaucoma in Retinal Images Based on Multiobjective Approach | Law Kumar Singh | Computer Science & Engg. | IJAEC | 2020 | DBLP,Google Scholar,ACM Digital Library | |||||||||||||||||
| 71 | A Novel Deep Learning Approach for Detection of Glaucoma | Law Kumar Singh | Computer Science & Engg. | JARDCS | 2020 | SCOPUS | |||||||||||||||||
| 72 | wsn for disaster management | Rupali Mahajan | Electrical & Communcation Engg. | JETIR | 2020 | UGC approved journal | |||||||||||||||||
| 73 | Forest Fire Detection System using GSM Module | Rupali Mahajan | Electrical & Communcation Engg. | IRJET | 2020 | UGC approved journal | |||||||||||||||||
| 74 | A Review of Fire Detection Techniques | Rupali Mahajan | Electrical & Communcation Engg. | IRJET | 2020 | UGC approved journal | |||||||||||||||||
| 75 | Earthquake early warning system | Rupali Mahajan | Electrical & Communcation Engg. | IRJET | 2020 | UGC approved journal | |||||||||||||||||
| 76 | Classification of Masses in Digital Mammograms using Firefly Based Optimization | Thawkar S | Information Technology | International Journal of Image, Graphics and Signal Processing (IJIGSP) | 2020 | UGC Care | |||||||||||||||||
| 77 | An Overview on Image Fusion | Kapil joshi , Himanshu Gupta, Sumita Lamba | Information Technology | Journal of Emerging Technologies and Innovative Research | 2020 | UGC | |||||||||||||||||
| 78 | Genetic-Ensemble based feature selection and classification of masses in digital Mammograms | Thawkar S | Information Technology | Journal of Intelligent Systems | 2020 | Scopus/Web of Science | |||||||||||||||||
| 79 | Experimental study of biomedical waste incinerator by using input-output method – A case of biomedical waste incinerator in Agra, India | Dr. Sandeep Verma | Mechanical Engineering | INTERNATIONAL REFFERED JOURNALS | 2020 | ||||||||||||||||||
| 80 | Provably secure certificate-based proxy blind signature scheme from pairings | Harendra Singh, Girraj Kumar Verma, B. B. Singh | Mathematics | Information Sciences, 468 (2018), pp. 1-13 | 2020 | SCI | |||||||||||||||||
| 81 | Bandwidth Efficient Designated Verifier Proxy Signature Scheme for Healthcare Wireless Sensor Networks | Harendra Singh, Girraj Kumar Verma, B. B. Singh, | Mathematics | Ad Hoc Networks, 81(2018), pp. 100-108 | 2020 | SCIE | |||||||||||||||||
| 82 | Some Dual Series Equations involving Laguerre Polynomial, | Mukti Richhariya | Mathematics | International Journal of Mathematics Research, Vol-10, number (2), 2018, pp. 87-90 | 2020 | others | |||||||||||||||||
| 83 | An efficient and provable certificate-based proxy signature scheme for IIoT environment | Harendra Singh | Mathematics | Information Sciences Volume 518, | 2020 | UGC | |||||||||||||||||
| 84 | Provably secure certificate-based proxy blind signature scheme from pairings | Harendra Singh, Girraj Kumar Verma, B. B. Singh | Mathematics | Information Sciences, 468 (2018), pp. 1-13 | 2020 | SCI | |||||||||||||||||
| 85 | Bandwidth Efficient Designated Verifier Proxy Signature Scheme for Healthcare Wireless Sensor Networks | Harendra Singh, Girraj Kumar Verma, B. B. Singh, | Mathematics | Ad Hoc Networks, 81(2018), pp. 100-108 | 2020 | SCIE | |||||||||||||||||
| 86 | Some Dual Series Equations involving Laguerre Polynomial, | Mukti Richhariya | Mathematics | International Journal of Mathematics Research, Vol-10, number (2), 2018, pp. 87-90 | 2020 | others | |||||||||||||||||
| 87 | An efficient and provable certificate-based proxy signature scheme for IIoT environment | Harendra Singh | Mathematics | Information Sciences Volume 518, | 2020 | UGC | |||||||||||||||||
| 88 | Analysis of the influence of Blaine no. and firing temperature on the iron ore pellets properties using RSM-I-optimal design – An approach towards suitability | Rakesh Prasad | Mechanical Engineering | Mining Metallurgy & Exploration | 2020 | SCI | |||||||||||||||||
| 89 | Experimental investigation of flushing approaches on EDM machinability during machining of titanium alloy. | Rakesh Prasad | Mechanical Engineering | Materials Today: Proceedings | 2020 | Scopus | |||||||||||||||||
| 90 | Effect of microwave heat hardening on microstructure and strength of coke composed iron ore pellet | Rakesh Prasad | Mechanical Engineering | Materials Today: Proceedings | 2020 | Scopus | |||||||||||||||||
| 91 | MICROSTRUCTURE AND PHASE ANALYSIS OF INDURATED IRON ORE PALLET[} | R.PRASAD, GUPTA K, PORAS A & AGARWAL S | Mechanical | Materials Today: Proceedings | 2020 | Scopus | |||||||||||||||||
| 92 | Microstructure and phase analysis of indurated iron ore pellets | Rakesh Prasad | Mechanical Engineering | Materials Today: Proceedings | 2020 | Scopus | |||||||||||||||||
| 93 | Application of Taguchi and response surface methodology approach to a sustainable model developed for a compression-ignition engine using polanga biodiesel/diesel blends | Abhishek Sharma,Yashvir Singh, Nishant K Singh, Amneesh Singla | Mechanical Engineering | sage | 2020 | SCI | |||||||||||||||||
| 94 |
| Nishant Kumar Singh, Yashvir Singh, Abhishek Sharma. | Mechanical Engineering | Sādhanā | 2020 | SCI | |||||||||||||||||
| 95 | Experimental investigation and statistical modeling of air-assisted EDM of Al–SiC composite with an improvised tool | Nishant Kumar Singh |
| J Braz. Soc. Mech. Sci. Eng | 2020 | SCI | |||||||||||||||||
| 96 |
| Nishant Kumar Singh, Yashvir Singh, Abhishek Sharma, Sanjeev Kumar | Mechanical Engineering | Fuel | 2020 | SCI | |||||||||||||||||
| 97 | Prediction of performance and emission parameters of Kusum biodiesel based diesel engine using neuro-fuzzy techniques combined with genetic algorithm | Nishant Kumar Singh, Yashvir Singh, Abhishek Sharma | Mechanical Engineering | Fuel | 2020 | SCI | |||||||||||||||||
| 98 | Effect of SiC nanoparticles concentration on novel feedstock Moringa Oleifera chemically treated with neopentylglycol and their trobological behavior | Yashvir Singh, Abhishek Sharma, Nishant Kumar Singh, M.M. Noor | Mechanical Engineering | Fuel | 2020 | SCI | |||||||||||||||||
| 99 | Friction and wear behavior of chemically modified Sal (Shorea Robusta) oil for bio based lubricant application with effect of CuO nanoparticles | Shailendra Chaurasia, Nishant Kumar Singh, Lavish Kumar Singh |
| Fuel | 2020 | SCI | |||||||||||||||||
| 100 | Effect of design parameters on performance and emissions of DI diesel engine running on biodiesel-diesel blends: Taguchi and utility theory | Abhishek Sharma, N. Maurya, Yashvir Singh, Nishant Kumar Singh, Sandeep Gupta | Mechanical Engineering | Fuel | 2020 | SCI | |||||||||||||||||
| 101 | Effect of ZnO nanoparticles concentration as additives to the epoxidized Euphorbia Lathyris oil and their tribological characterization | YashvirSinghaNishantKumar SinghbAbhishekSharmacAmneeshSingladDeepakSingheErweenAbd Rahimf | Mechanical Engineering | Fuel | 2020 | SCI | |||||||||||||||||
| 102 | Comparative study of Rotary-EDM, Gas Assisted-EDM, and Gas Assisted Powder Mixed-EDM of the hybrid metal matrix composite. | Nishant Kumar Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2020 | Scopus | |||||||||||||||||
| 103 | Experimental Investigation for Sustainable Electric Discharge Machining with Pongamia and Jatropha as dielectric medium. | Nishant Kumar Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2020 | Scopus | |||||||||||||||||
| 104 | An Environmental-Friendly Electrical Discharge Machining Using Different Sustainable Techniques: A review. | Nishant Kumar Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2020 | Scopus | |||||||||||||||||
| 105 | Shorea Robusta (Sal): A novel feedstock for bio based lubricant application with effect of SiO2 nanoparticles | Nishant Kumar Singh | Mechanical Engineering | Journal of Bio-and Tribo-Corrosion | 2020 | Scopus | |||||||||||||||||
| 106 | A Mathematical Model to Assess the Material Removal Rate during Gas-Assisted Electrical Discharge Drilling Process | Nishant Kumar Singh | Mechanical Engineering | International Journal of Mathematical, Engineering and Management Sciences | 2020 | Scopus | |||||||||||||||||
| 107 | Development of Bio-Based Lubricant from Modified Desert Date Oil (Balanites Aegyptiaca) with Copper Nanoparticles Addition and their Tribological Analysis | Nishant Kumar Singh | Mechanical Engineering | Fuel, Volume 259, 116259. | 2020 | SCI | |||||||||||||||||
| 108 | Effective Utilization of tobacco (Nicotiana Tabaccum) for Biodiesel Production and its Application on Diesel Engine Using Response Surface Methodology Approach | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 273, 117793. | 2020 | SCI | |||||||||||||||||
| 109 | Chemical modification of Julifora oil with trimethylprpone (TMP) and effect of TiO2 nanoparticles concentration during tribological investigation. | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 280, 118704. | 2020 | SCI | |||||||||||||||||
| 110 | Electric discharge drilling with gas-assisted multi-hole slotted tool. | Nishant Kumar Singh | Mechanical Engineering | International journal of Science and Technology, Scientia Iranica, | 2020 | SCI | |||||||||||||||||
| 111 | Effect of SiC nanoparticles concentration on novel feedstock Moringa Oleifera chemically treated with Neopentylglycol and their trobological behavior. | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 280, 118630. | 2020 | SCI | |||||||||||||||||
| 112 | Experimental investigation and statistical modeling of air-assisted EDM of Al–SiC composite with an improvised tool. | Nishant Kumar Singh | Mechanical Engineering | J Braz. Soc. Mech. Sci. Eng. 42, 312. | 2020 | SCI | |||||||||||||||||
| 113 | Prediction of Performance and Emission Parameters of DI Diesel Engine Running on Kusum Biodiesel- A Combined Application of Neuro-Fuzzy Technique and Genetic Algorithm. | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 280, 118629. | 2020 | SCI | |||||||||||||||||
| 114 | Diesel engine performance and emission analysis running on jojoba biodiesel using intelligent hybrid prediction techniques. | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 279, 118571. | 2020 | SCI | |||||||||||||||||
| 115 | Friction and wear behavior of chemically modified Sal (Shorea Robusta) oil for bio based lubricant application with effect of CuO nanoparticles | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 282, 118762. | 2020 | SCI | |||||||||||||||||
| 116 | Application of Taguchi and RSM Approach to a Sustainable Model Developed for a CI Engine using Polanga Biodiesel/Diesel Blends. | Nishant Kumar Singh | Mechanical Engineering | Part I: Journal of Systems and Control Engineering | 2020 | SCI | |||||||||||||||||
| 117 | Effect of ZnO nanoparticles concentration as additives to the Epoxidized Euphorbia Lathyris oil and their tribological characterization. | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 279, 118571. | 2020 | SCI | |||||||||||||||||
| 118 | Experimental Investigation on electric discharge drilling of Titanium Alloy (Ti-6Al-4 V) with gas aided rotary tool. | Nishant Kumar Singh | Mechanical Engineering | Sadhana | 2020 | SCI | |||||||||||||||||
| 119 | Influence of dry sliding wear behavior and assessment of properties on treated AISI310 SS material by gas nitriding process | Anand Poras | Mechanical Engineering | Materials Today: proceedings | 2020 | Scopus | |||||||||||||||||
| 120 | ,Effect of microwave heat hardening on microstructure and strength of coke composed iron ore pellet | R. Prasad | Mechanical Engineering | Materials Today: proceedings | 2020 | Scopus | |||||||||||||||||
| 121 | Modeling and optimization of multi-hole rotary electrical discharge drilling of die steel | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | Scopus | |||||||||||||||||
| 122 | Predictive analysis of surface roughness in EDM using semi-empirical, ANN and ANFIS techniques: A comparative study | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | SCOPUS | |||||||||||||||||
| 123 | Comparative micro structural investigation of Al-SiC-Mg and Al-B4C-Mg particulate metal matrix composite. Annales de Chimie-Science des Materiaux | Nishant Kumar Singh | Mechanical Engineering | IIETA | 2020 | SCOPUS | |||||||||||||||||
| 124 | Integration of GA and neuro-fuzzy approaches for the predictive analysis of gas-assisted EDM responses | Nishant Kumar Singh | Mechanical Engineering | SN Applied Sciences | 2020 | SCOPUS | |||||||||||||||||
| 125 | Performance and emission characteristics of the diesel engine running on neem (Azadirachtaindica) biodiesel with effect of exhaust gas recirculation at optimum injection strategies. | Nishant Kumar Singh | Mechanical Engineering | Pollution | 2020 | SCOPUS | |||||||||||||||||
| 126 | Chemical modification of Julifora oil with trimethylprpone (TMP) and effect of TiO2 nanoparticles concentration during tribological investigation | Nishant Kumar Singh | Mechanical Engineering | FuelVolume 280 | 2020 | SCI | |||||||||||||||||
| 127 | Comparative micro structural investigation of Al-SiC-Mg and Al-B4C-Mg particulate metal matrix composite | Nishant Kumar Singh | Mechanical Engineering | Annales de Chimie-Science des Materiaux. | 2020 | Scopus | |||||||||||||||||
| 128 | Effect of design parameters on performance and emissions of DI diesel engine running on biodiesel-diesel blends: Taguchi and Utility Theory | Nishant Kumar Singh | Mechanical Engineering | FuelVolume 281 | 2020 | SCI | |||||||||||||||||
| 129 | Effect of SiC nanoparticles concentration on novel feedstock MoringaOleifera chemically treated with Neopentylglycol and their trobological behavior | Nishant Kumar Singh | Mechanical Engineering | FuelVolume 280 | 2020 | SCI | |||||||||||||||||
| 130 | Effect of SiO2 nanoparticles on the tribological behavior of Balanites Aegytiaca (Desert date) oil based biolubricant. | Nishant Kumar Singh | Mechanical Engineering | Journal of Bio-and Tribo-Corrosion | 2020 | Scopus | |||||||||||||||||
| 131 | Effective Utilization of tobacco (NicotianaTabaccum) for Biodiesel Production and its Application on Diesel Engine Using Response Surface Methodology Approach | Nishant Kumar Singh | Mechanical Engineering | FuelVolume 273 | 2020 | SCI | |||||||||||||||||
| 132 | Electric discharge drilling with gas-assisted multi-hole slotted tool | Nishant Kumar Singh | Mechanical Engineering | International journal of Science and Technology | 2020 | SCI | |||||||||||||||||
| 133 | Experimental Investigation and Analysis of Argon Assisted Perforated Electrodes” | Nishant Kumar Singh | Mechanical Engineering | Journal of Materials and Manufacturing Process (Taylor and Francis) | 2020 | SCI | |||||||||||||||||
| 134 | Experimental investigation of flushing approaches on EDM machinability during machining of titanium alloy | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | SCOPUS | |||||||||||||||||
| 135 | Experimental investigation of flushing approaches on EDM machinability during machining of titanium alloy. | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | Scopus | |||||||||||||||||
| 136 | Experimental Investigation of Non-edible dielectric fluid (Bio-dielectric) in Electrical Discharge Machining process | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | Scopus | |||||||||||||||||
| 137 | Impact of powder additive in liquid and gaseous dielectric fluid on electrical discharge machining through aerospace region application- A review. | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings, 25(4): 952-960. | 2020 | Scopus | |||||||||||||||||
| 138 | Impact of powder additives in liquid and gaseous dielectric fluids on electrical discharge machining through aerospace region applications-A review | Nishant Kumar Singh | Mechanical Engineering | Materials Today: proceedings | 2020 | SCOPUS | |||||||||||||||||
| 139 | Improved lubrication mechanism of the chemically modified mahua (madhuca Indica) oil with the addition of the copper oxide nanoparticles. | Nishant Kumar Singh | Mechanical Engineering | Journal of Bio-and Tribo-Corrosion, 6:94. | 2020 | Scopus | |||||||||||||||||
| 140 | Integration of GA and neuro-fuzzy approaches for the predictive analysis of gas-assisted EDM responses. | Nishant Kumar Singh | Mechanical Engineering | SN Appl. Sci. 2, 137 | 2020 | Scopus | |||||||||||||||||
| 141 | Intelligent hybrid approaches for ensuring better prediction of gas‑assisted EDM responses. | Nishant Kumar Singh | Mechanical Engineering | SN Applied Sciences, 2:914 | 2020 | Scopus | |||||||||||||||||
| 142 | Madhuca Indica (Mahua): A novel feedstock for bio based lubricant application treated with trimethylolpropane and tribological analysis. | Nishant Kumar Singh | Mechanical Engineering | Australian Journal of Mechanical Engineering. | 2020 | Scopus | |||||||||||||||||
| 143 | Micro And Nano-Crystalline Diamond Coatings Of Co-Cemented Tungsten Carbide Tools With Their Characterization | Nishant Kumar Singh | Mechanical Engineering | Journal of Bio-and Tribo-Corrosion | 2020 | Scopus | |||||||||||||||||
| 144 | Moringa Oleifera: Bio based lubricant development from a novel feedstock for tribological characterization. | Nishant Kumar Singh | Mechanical Engineering | Advances in Materials and Processing Technologies | 2020 | Scopus | |||||||||||||||||
| 145 | Performance and emission characteristics of the diesel engine running on neem (Azadirachta indica) biodiesel with effect of exhaust gas recirculation at optimum injection strategies. | Nishant Kumar Singh | Mechanical Engineering | Pollution, 6(3): 623-633. | 2020 | Scopus | |||||||||||||||||
| 146 | Predictive analysis of surface finish in gas assisted electrical discharge machining using statistical and soft computing techniques | Nishant Kumar Singh | Mechanical Engineering | Surface Review and Letters, | 2020 | SCI | |||||||||||||||||
| 147 | Enhanced pyroelectric and piezoelectric properties of PVDF – BaTiO3 nanocomposites layered samples | Pramod Kumar Singh, Mulayam Singh Gaur, Dilip Johari, Rohan Sagar, Akash Gupta, Ashutosh Sharma, Govind Singh, Mayank Yadav | Physics | Ferroelectrics | 2020 | SCI | |||||||||||||||||
| 148 | Electrochemical aptamerbiosensorforAs3+ based onapta deep trappedAg-Aualloynanoparticles-impregnated glassy carbon electrode | R. Yadav, V. Kushwah, M.S. Gaur, S. Bhadauria, A.N. Berlina, A.V. Zherdev, &B.B. Dzantiev | Physics | International Journal of Environmental Analytical Chemistry (Taylor & Francis) | 2020 | SCI | |||||||||||||||||
| 149 | Dielectric, pyroelectric and polarization behavior of polyvinylidene fluoride (PVDF)-gold nanoparticles (AuNPs) nanocomposites | Mamta Kushwah, Rohan Sagar, AA Rogachev, MS Gaur | Physics | vacuum | 2020 | SCI | |||||||||||||||||
| 150 | Dielectric behavior and structural characterization of polymeric double layer thin films | Pooja Saxena, Prashant Shukla, MS Gaur | Physics | Journal of Applied Polymer Science | 2020 | SCI | |||||||||||||||||
| 151 | Study of human blood under influence of magnetic field by AC dielectric and thermally stimulated discharge current methods | Dayal Saran, Rohan Sagar, Mulayam Singh Gaur | Physics | Journal of Thermal Analysis and Calorimetry | 2020 | SCI | |||||||||||||||||
| 152 | An investigation on Transient Current characterstics in polymeric double layer Thin Films | Pooja Saxena, Prashant Shukla, MS Gaur | Physics | Journal of Integrated Science and Technology | 2020 | UGC care | |||||||||||||||||
| 153 | Measurement of AC and DC relaxation properties in polyvinyl chloride (PVC) nanocomposites | Rajesh, Dalveer Kaur, MS Gaur, Pankaj Goyal, RK Tiwari, AA Rogachev, AV Rogachev | Physics | Measurement | 2020 | SCI | |||||||||||||||||
| 154 | Investigation of TSDC and dielectric modulus of PVDF–BaZrO3 nanocomposites thin film | Rohan Sagar, MS Gaur, BS Bhadoria | Physics | Vacuum | 2020 | SCI | |||||||||||||||||
| 155 | Effect of interface in dielectric relaxation properties of PEMA–BaZrO 3 nanocomposites | Pramod Kumar Singh, Pankaj Goyal, Ashutosh Sharma, Dalveer Kaur, MS Gaur | Physics | Polymer Bulletin | 2020 | SCI | |||||||||||||||||
| 156 | Electrochemical aptamer biosensor for As3+ based on apta deep trapped Ag-Au alloy nanoparticles-impregnated glassy carbon electrode | Reetu Yadav, Vinod Kushwah, MS Gaur, Seema Bhadauria, Anna N Berlina, Anatoly V Zherdev, BB Dzantiev | Physics | International Journal of Environmental Analytical Chemistry | 2020 | SCI | |||||||||||||||||
| 157 | Bio synthesis of colloidal AuNPs using thermally assisted pulse sonication method | Mamta Kushwah, Mulayam Singh Gaur, Kavita Arora, Anna N Berlina | Physics | Materials Research Express | 2020 | SCI | |||||||||||||||||
| 158 | Biosynthesis of novel Ag@ Cu alloy NPs for enhancement of methylene blue photocatalytic activity and antibacterial activity | Mamta Kushwah, MS Gaur, Anna N Berlina, Kavita Arora | Physics | Materials Research Express | 2020 | SCI | |||||||||||||||||
| 159 | Rapid visual detection of lead and mercury via enhanced crosslinking aggregation of aptamer-labeled gold nanoparticles | Anna Nikolaevna Berlina, Anatoly Vitalievich Zherdev, Svetlana Mikhailovna Pridvorova, Mulayam Singh Gaur, Boris Borisovich Dzantiev | Physics | Journal of nanoscience and nanotechnology | 2020 | SCI | |||||||||||||||||
| 160 | Enhanced catalytic activity of chemically synthesized Au/Ag/Cu trimetallic nanoparticles | Mamta Kushwah, Seema Bhadauria, Kavita Arora, MS Gaur | Physics | Materials Research Express | 2020 | SCI | |||||||||||||||||
| 161 | Colorimetric technique for antimony detection based on the use of gold nanoparticles conjugated with poly-A oligonucleotide | Anna N Berlina, Nadezhda S Komova, Anatoly V Zherdev, Mulayam S Gaur, Boris B Dzantiev | Physics | Applied Science | 2020 | sci | |||||||||||||||||
| 162 | Understanding the Effect of Structural diversity in WRKY transcription factors on DNA binding efficiency through Molecular Dynamics Simulation. Biology. 2019, 8, 83; | Akshay Singh, Ajay Kumar Sharma, Nagendra Kumar Singh, Humirah Sonah, Rupesh Deshmukh, Tilak Raj Sharma | Biotechnology | Biology | 2019 | Scopus | |||||||||||||||||
| 163 | The suitability of the innovative technology of plasma pyrolysis for disposal of biomedical waste in City of Agra, India | Dr. Sandeep Verma | Chemical Engineering | International Journal of Scientific Research Vol-08,issue 01 January 2019,PP 09-12 | 2019 | Scopus | |||||||||||||||||
| 164 | Sustainability of the Polanga Biodiesel Blends during the Application to the Diesel Engine Performance and Emission Parameters-Taguchi and RSM Approach | Nishant Kumar Singh | Mechanical Engineering | Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(1):14. | 2019 | SCI | |||||||||||||||||
| 165 | Effect of alumina nanoparticles as additive on the friction and wear behavior of polanga-based lubricant | Nishant Kumar Singh | Mechanical Engineering | S N Applied Sciences (Springer), Vol. 1:281. | 2019 | Scopus | |||||||||||||||||
| 166 | Heat Transfer and Friction Characteristics of an Artificially Roughened Solar Air Heater” | R. Prasad | Mechanical Engineering | Advances In Fluid And Thermal Engg”( | 2019 | Scopus | |||||||||||||||||
| 167 | Predictive analysis of surface roughness in argon-assisted EDM using semi empirical and ANN techniques. | Nishant Kumar Singh | Mechanical Engineering | SN Appl. Sci. 1: 995. Springer. | 2019 | Scopus | |||||||||||||||||
| 168 | Production of polanga methyl esters and optimization of diesel engine parameters through response surface methodology approach | Nishant Kumar Singh | Mechanical Engineering | Process Safety and Environmental Protection | 2019 | SCI | |||||||||||||||||
| 169 | Sustainability of jojoba/diesel blends for DI diesel engine applications-taguchi and response surface methodology concept | Nishant Kumar Singh | Mechanical Engineering | Industrial Crops and Products (Elsevier). Vol. 139, Issue 1, 111857. | 2019 | SCI | |||||||||||||||||
| 170 | Experimental investigation and effects of process parameters on EDM of Al7075/SiC composite reinforced with magnesium particles. | Nishant Kumar Singh | Mechanical Engineering | Materials Today: Proceedings (Elsevier), | 2019 | Scopus | |||||||||||||||||
| 171 | Predictive analysis of surface roughness in argon-assisted EDM using semiempirical and ANN techniques | Nishant K.Singh, Sandeep Agrawal, Dilip Johari, Yashvir Singh |
| Springer International Publishing | 2019 | ||||||||||||||||||
| 172 | Enhanced pyroelectric and piezoelectric properties of PVDF- BaTiO3 nanocomposites samples | D Johari | Mechanical Engineering | Ferroelectrics | 2019 | SCI | |||||||||||||||||
| 173 | Effect of Addition of Copper Nanoparticles on the Tribological Behavior of Macadamia Oil at Different Sliding Speeds | Nishant Kumar Singh | Mechanical Engineering | Energy Sources Part A: Recovery, Utilization and Environmental Effects | 2019 | SCI | |||||||||||||||||
| 174 | Application of Response Surface Methodology to Optimize Diesel Engine Parameters fuelled with Pongamia Biodiesel/Diesel Blends Energy Sources | Nishant Kumar Singh | Mechanical Engineering | Part A: Recovery, Utilization, and Environmental Effects | 2019 | SCI | |||||||||||||||||
| 175 | Enhanced pyroelectric and piezoelectric properties of PVDF – BaTiO3 nanocomposites layered samples | Pramod Kumar Singh, Mulayam Singh Gaur, Dilip Johari, Rohan Sagar, Akash Gupta, Ashutosh Sharma, Govind Singh & Mayank Yadav | Mechanical Engineering | Ferroelectrics | 2019 | SCI | |||||||||||||||||
| 176 | Predictive analysis of surface roughness in argon-assisted EDM using semi empirical and ANN techniques | Nishant Kumar Singh | Mechanical Engineering | SN Applied Sciences | 2019 | ESCI | |||||||||||||||||
| 177 | Application of Response Surface Methodology to Optimize Diesel Engine Parameters fuelled with Pongamia Biodiesel/Diesel Blends Energy Sources, | Nishant Kumar Singh | Mechanical Engineering | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, | 2019 | SCI | |||||||||||||||||
| 178 | Experimental studies on performance and exhaust emission characteristics of a diesel engine fuelled with diesel-linseed oil methyl ester (LOME) blends | Nishant Kumar Singh | Mechanical Engineering | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, | 2019 | SCI | |||||||||||||||||
| 179 | Experimental Investigation and Modeling of Surface Finish in Argon-Assisted Electrical Discharge Machining Using Dimensional Analysis | Nishant Kumar Singh | Mechanical Engineering | Arabian Journal for Science and Engineering | 2019 | SCI | |||||||||||||||||
| 180 | Development of Bio-Based Lubricant from Modified Desert Date Oil (BalanitesAegyptiaca) with Copper Nanoparticles Addition and their Tribological Analysis | Nishant Kumar Singh | Mechanical Engineering | Fuel Volume 259 | 2019 | SCI | |||||||||||||||||
| 181 | A semi-empirical model to predict material removal rate during air-assisted electrical discharge machining | Nishant Kumar Singh | Mechanical Engineering | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019 | SCI | |||||||||||||||||
| 182 | Application of Response Surface Methodology to Optimize Diesel Engine Parameters fuelled with Pongamia Biodiesel/Diesel Blends” published in Energy Sources Part A: Recovery, Utilization and Environmental Effects ( | Nishant Kumar Singh | Mechanical Engineering | Energy Sources Part A: Recovery, Utilization and Environmental Effects | 2019 | SCI | |||||||||||||||||
| 183 | Cu EDTA and Cu DTPA effects on essential and trace metal uptake by tritium sativum (wheat) with varying combinations of superphosphate and Mussoorie rock phosphate | Suruchi | Chemistry | International Journal of Environmental Engineering,Inderscience | 2018 | Scopus | |||||||||||||||||
| 184 | Robustness for Authentication of the Human Using Face, Ear, and Gait Multimodal Biometric System | Law Kumar Singh,Munish Khanna | Computer Science & Engg. | IJISMD,IGI Global | 2018 | SCOPUS,ESCI | |||||||||||||||||
| 185 | Performance Comparison of Various Algorithms During Software Fault Prediction | Munish Khanna | Computer Science & Engg. | IJGHPC | 2018 | SCOPUS,ESCI | |||||||||||||||||
| 186 | A Multi-Objective Approach for Test Suite Reduction During Testing of Web Applications: A Search-Based Approach | Law Kumar Singh | Computer Science & Engg. | IJAMC | 2018 | SCOPUS,ESCI | |||||||||||||||||
| 187 | Performance analysis of machine learning techniques for glaucoma detection based on textural and intensity features | Law Kumar Singh,Munish Khanna | Computer Science & Engg. | IJICA,Inderscience | 2018 | SCOPUS | |||||||||||||||||
| 188 | An enhanced deep image model for glaucoma diagnosis using feature-based detection in retinal fundus | Law Kumar Singh,Munish Khanna | Computer Science & Engg. | MBEC,Springer | 2018 | SCI | |||||||||||||||||
| 189 | An Artificial Intelligence-Based Smart System for Early Glaucoma Recognition Using OCT Images | Law Kumar Singh,Munish Khanna | Computer Science & Engg. | IJEHMC,Global | 2018 | SCOPUS,ESCI | |||||||||||||||||
| 190 | Precursory response of low frequency signals for detection of seismic rapture in Indian region | Vijay Katta | Computer Science & Engg. | IJITEE, Volume-8 Issue-9, July 2019 | 2018 | SCOPUS | |||||||||||||||||
| 191 | Artificial intelligence based medical decision support system for early and accurate breast cancer prediction | Law Kumar Singh, Munish Khanna, Rekha Singh | Computer Science & Engg. | 2018 | SCOPUS | ||||||||||||||||||
| 192 | Collaboration of features optimization techniques for the effective diagnosis of glaucoma in retinal fundus images | Law Kumar Singh, Munish Khanna,Shankar Thakwar, Rekha Singh | Computer Science & Engg. | 2018 | SCOPUS | ||||||||||||||||||
| 193 | An IoT based predictive modeling for Glaucoma detection in optical coherence tomography images using hybrid genetic algorithm | Law Kumar Singh, Pooja, Hitendra Garg, Munish Khanna | Computer Science & Engg. | 2018 | SCOPUS | ||||||||||||||||||
| 194 | Design of Residential Fire Alarm System using Wireless Sensor Network | Rupali Mahajan | Electrical & Communcation Engg. | International Journal of Advanced Science and Technology | 2018 | scopus indexed | |||||||||||||||||
| 195 | Multi-objective Techniques for Feature Selection and Classification in Digital Mammography | Thawkar S | Information Technology | International journal of intelligent decision | 2018 | SCI | |||||||||||||||||
| 196 | Breast cancer prediction using a hybrid method based on Butterfly Optimization Algorithm and Ant Lion Optimizer | S Thawkar, S Sharma, M Khanna, L kumar Singh | Information Technology | Computers in Biology and Medicine 139, 104968 | 2018 | SCI | |||||||||||||||||
| 197 | Radiologist-level two novel and robust automated computer-aided prediction models for early detection of COVID-19 infection from chest X-ray images | M Khanna, A Agarwal, LK Singh, S Thawkar, A Khanna, D Gupta | Information Technology | Arabian Journal for Science and Engineering, 1-33 | 2018 | SCI | |||||||||||||||||
| 198 | A hybrid model using teaching–learning-based optimization and Salp swarm algorithm for feature selection and classification in digital mammography | S Thawkar | Information Technology | Journal of Ambient Intelligence and Humanized Computing, 1-16 | 2018 | SCI | |||||||||||||||||
| 199 | Feature selection and classification in mammography using hybrid crow search algorithm with Harris hawks optimization | S Thawkar | Information Technology | Biocybernetics and Biomedical Engineering 42 (4), 1094-1111 | 2018 | Scopus | |||||||||||||||||
| 200 | A novel hybrid robust architecture for automatic screening of glaucoma using fundus photos, built on feature selection and machine learning‐nature driven computing | LK Singh, M Khanna, S Thawkar | Information Technology | Expert Systems, e13069 | 2018 | Scopus | |||||||||||||||||
| 201 | Performance Evaluation of Machine Learning Algorithms for Stock Price and Stock Index Movement Prediction Using Trend Deterministic Data Prediction | M Khanna, M Kulshrestha, LK Singh, S Thawkar, K Shrivastava | Information Technology | International Journal of Applied Metaheuristic Computing (IJAMC) 13 (1), 1-30 | 2018 | Scopus | |||||||||||||||||
| 202 | Experimental investigation of process parameters in nitrogen assisted EDM of En19 steel | Nishant Kumar Singh | Mechanical Engineering | International Journal of Applied Engineering Research 13(6), 165-169 | 2018 | UGC approved | |||||||||||||||||
| 203 | Electrical Discharge Drilling of Al-Sic Composite Using Air Assisted Rotary Tubular Electrode | Nishant K.SinghaRakeshPrasadbDilipJoharia | Mechanical Engineering | Materials Today: Proceedings | 2018 | Scopus | |||||||||||||||||
| 204 | “Comparison of Gas Assisted Hybrid EDM, Rotary EDM and Conventional EDM Processing of High Carbon High Chromium Die Steel” | Anand Poras | Mechanical Engineering | International Journal of Engineering & Technology | 2018 | Scopus | |||||||||||||||||
| 205 | Experimental study and parameter optimization of gas assisted electrical discharge machining | Nishant Kumar Singh | Mechanical Engineering | International Journal of Engineering and Technology, 7(3.12):1163. | 2018 | Scopus | |||||||||||||||||
| 206 |
| Nishant Kumar Singh | Mechanical Engineering | International Journalof Engineering &Technology | 2018 | Scopus | |||||||||||||||||
| 207 | Optimization of performance and emission parameters of direct injection diesel engine fuelled with with pongamia methyl esters-response surface methodology approach | Nishant Kumar Singh | Mechanical Engineering | Industrial Crops and Products (Elsevier), Vol. 126, 218-226. | 2018 | SCI | |||||||||||||||||
| 208 | comparative study of wear andfriction characteristics of glass fibre reinforced epoxy resin, sliding under dry,oillubricatedand inert gas environments | Sandeep Agrawal | Mechanical Engineering | Tribology International | 2018 | Scopus | |||||||||||||||||
| 209 | Optimization of performance and emission parameters of direct injection diesel engine fuelled with pongamia methyl esters-response surface methodology approach | Nishant Kumar Singh | Mechanical Engineering | ” Industrial Crops and Products | 2018 | SCI | |||||||||||||||||
| 210 | Sustainability of jojoba biodiesel/diesel blends for DI diesel engine applications-taguchi and response surface methodology concept | Nishant Kumar Singh | Mechanical Engineering | ” Industrial Crops and Products | 2018 | SCI | |||||||||||||||||
| 211 | Optimization of wear and friction characteristics of Phyllanthus Emblica seed oil based lubricant using response surface methodology | Nishant Kumar Singh | Mechanical Engineering | Egyptian Journal of Petroleum. Vol 27, issue 4, 1145-1155. | 2018 | Scopus | |||||||||||||||||
| 212 | Optimization of wear and friction characteristics of PhyllanthusEmblica seed oil based lubricant using response surface methodology | Nishant Kumar Singh | Mechanical Engineering | Egyptian Journal of Petroleum | 2018 | SCOPUS | |||||||||||||||||
| 213 | Comparative investigation on thewear and friction behaviors of carbon fiber reinforced polymer composites under drysliding, oil lubrication and inert gas environment | Sandeep Agrawal | Mechanical Engineering | Materials Today: Proceedings | 2018 | Scopus | |||||||||||||||||
| 214 | Electrical Discharge Drilling of D3 Die Steel using Air Assisted Rotary Tubular Electrode” | Anand Poras | Mechanical Engineering | Materials Today: proceedings | 2018 | Scopus | |||||||||||||||||
| 215 | “Electrical Discharge Drilling of Al-Sic Composite Using Air Assisted Rotary Tubular Electrode” | Nishant Kumar Singh | Mechanical Engineering | International Journal of Materials Today | 2018 | SCI | |||||||||||||||||
| 216 | Effect of alumina nanoparticles as additive on the friction and wear behavior of polanga based lubricant | Nishant Kumar Singh | Mechanical Engineering | International Journal of Engineering and Technology. Vol 7, 4.39, 417-419 | 2018 | Scopus | |||||||||||||||||
| 217 | Prospects of Inedible Plant Oil Driven Bio-lubricants for an Automotive Application-A Review | Nishant Kumar Singh | Mechanical Engineering | International journal of ambient energy | 2018 | Scopus | |||||||||||||||||
| 218 | Effect of addition of copper nanoparticles on the tribological behavior of macadamia oil at different sliding” | Nishant Kumar Singh | Mechanical Engineering | Energy Sources, Part A: Recovery, Utilization, and Environmental Effects | 2018 | SCI | |||||||||||||||||
| 219 | Rapid and selective electrochemical detection of pb 2+ ions using aptamer-conjugated alloy nanoparticles | Reetu Yadav, Anna N Berlina, Anatoly V Zherdev, MS Gaur, BB Dzantiev | Physics | SN Applied Sciences | 2018 | SCOPUS | |||||||||||||||||
| 220 | Preparation, characterization and microhardness measurements of hybrid nanocomposites based on PMMA+ P (VDF–TrFE) and graphene oxide | Rohan Sagar, MS Gaur, Vinod Kushwah, Aakash Rathore, DG Piliptsou, AA Rogachev | Physics | Polymer Bulletin | 2018 | SCI | |||||||||||||||||
| 221 | Piezoelectric and pyroelectric properties of ceramic nanoparticles-based nanostructured PVDF/PVC blend nanocomposites | Rohan Sagar, MS Gaur, AA Rogachev | Physics | Journal of Thermal Analysis and Calorimetry | 2018 | SCI | |||||||||||||||||
| 222 | Copper nanoparticles-catalys ed reduction of methylene blue and high-sensitive chemiluminescence | Mamta Kushwah, Reetu Yadav, Mulayam Singh Gaur & Anna Nikolaevna Berlina | Physics | (Springer) | 2018 | SCI | |||||||||||||||||
| 223 | Thermal analysis of polymer blends and double layer by DSC | Pooja Saxena, Prashant Shukla and MS Gaur | Physics | Polymers and Polymer Composite | 2018 | SCI | |||||||||||||||||
| 224 | Efficient approach for the classification of masses in digital mammograms | Thawkar S | Information Technology | International journal of innovative computing information and control | 2017 | Web of Science | |||||||||||||||||
| 225 | Histogram of Oriented Gradients (HOG)-Based Artificial Neural Network (ANN) Classifier for Glaucoma Detection | Law Kumar Singh, Pooja, Hitendra Garg, Munish Khanna | Computer Science & Engg. | 2017 | SCOPUS | ||||||||||||||||||
| 226 | Sustainability of polanga oil blended lubricant at different load and sliding distance” | Nishant Kumar Singh | Mechanical Engineering | Energy sources part a. recovery, utilization and environmental effects. Vol. 39, 19, 1970-1977 | 2017 | SCI | |||||||||||||||||
| 227 | Influence of silver nanoparticles on dielectric properties of human blood | M. S. Gaur,Dayal Saran,Rohan Sagar,Kamlesh Sisodiya,Karuna Gaur ,Ajay pal Indoliya | Physics | ECS Journal of Solid State Science and Technology | 2017 | SCI | |||||||||||||||||
| 228 | Investigation of anticorrosion properties of epoxy GO nanocomposites spin coated Aluminum Alloy 7075 | MS Gaur, Rajesh Kumar Raghav, Rohan Sagar, RK Tiwari | Physics | Polymers and Polymer Composites | 2017 | SCI | |||||||||||||||||
| 229 | Investigation of Structural and Thermal Properties of Graphene Oxide Reinforced Epoxy Nanocomposites | MS Gaur, Rajesh Kumar Raghav, Rohan Sagar, RK Tiwari | Physics | ECS Journal of Solid State Science and Technology | 2017 | SCI | |||||||||||||||||
| 230 | Study of structural, thermal and piezoelectric properties of polyvinylidene fluoride–BaZrO3 nanocomposites | Rohan Sagar, MS Gaur, Rajesh Kumar Raghav | Physics | Journal of Thermal Analysis and Calorimetry | 2017 | SCI | |||||||||||||||||
| 231 | Air-gap thermally stimulated discharge currents in PVDF-PMMA double-layered samples | Pooja Saxena, Prashant Shukla, MS Gaur | Physics | Polymer Bulletin | 2017 | SCI | |||||||||||||||||
| 232 | SASA: SMS Authenticity & Security on Android Environment using ASCII Code Control Chart & Active Key | Ajay Raj Parashar Deepti Mittal Prerana Garg | Information Technology | International Journal of Advance Research in Science and Engineering | 2016 | Google Scholar | |||||||||||||||||
- Office Timing: 10.00am - 5.00pm